Terminal procedures

Module 4 of 7Performance-based navigation (PBN)7 min readUpdated Nov 2026

RNAV and RNP departures and arrivals are flown from the database, so the crew's work moves from tracking a radial to checking that the right procedure is loaded, that it matches the chart, and that the aircraft follows it within tolerance.

In this module
  1. RNAV 1 and RNP 1
  2. Waypoints: fly-by and fly-over
  3. Path terminators
  4. The navigation database
  5. Before departure
  6. Flying the path
  7. When ATC changes the plan
  8. RNAV on conventional procedures
  9. Key points

RNAV 1 and RNP 1

The FAA AIM says RNAV 1 is typically used for departure procedures and STARs and appears on the charts; the aircraft must keep a total system error of no more than 1 NM for 95 percent of the flight time. RNP 1 requires the same lateral accuracy value of 1 for arrivals and departures in the terminal area, and for the initial and intermediate approach on conventional procedures with PBN segments, such as an ILS with a PBN feeder, initial approach fix or missed approach. The difference is RNP's on-board monitoring and alerting (module 1).

Radius-to-fix (RF) capability is optional for RNP 1 eligibility. An aircraft can therefore be eligible for RNP 1 and still not be allowed to fly a procedure with an RF turn: the AIM says RF must be specifically listed as a feature of the avionics. On U.S. charts, the procedure's PBN requirements, such as the navigation specification, any required sensor or function and the minimum RNP value, appear in a standardized "PBN box", and every item listed there is required to fly the PBN elements.

Unlock the rest of this module

This course and its quiz are part of PRO, with every question bank on v1prep. Try PRO free for 7 days: no card needed, and it ends on its own.

Continue in v1prep → See PRO plans
Already a member? Sign in and the full course opens in the app

All modules

  1. The PBN conceptWhat performance-based navigation is: the navigation specification, RNAV and RNP and the monitoring that separates them, the specifications for each phase of flight, and why eligibility for one does not mean eligibility for another unless an inclusion is stated.Module 1 · 6 min read
  2. The system and its integrityThe FMS and the sensors it blends (GNSS, DME/DME, VOR/DME, inertial), how GPS integrity monitoring works (RAIM, fault detection and exclusion, SBAS), and what GNSS jamming and spoofing do to a PBN aircraft.Module 2 · 6 min read
  3. En route and oceanicThe en route specifications (RNAV 5, RNAV 2, RNP 2, A-RNP) and the oceanic ones (RNAV 10, RNP 4), the North Atlantic High Level Airspace and its equipment, and the crew procedures of oceanic flight: the crosschecks and route amendment checks that prevent gross navigation errors, and strategic lateral offsets.Module 3 · 6 min read
  4. Terminal proceduresRNAV 1 and RNP 1 SIDs and STARs: fly-by and fly-over waypoints, path terminators (TF, DF, CF, RF and heading legs), the navigation database and its rules, the checks before departure, how closely to fly the path, and what ATC may and may not change.Module 4 · 7 min read
  5. ApproachesRNP APCH and its four lines of minima (LNAV, LNAV/VNAV, LP and LPV), barometric VNAV and the temperature limits, how the final approach is flown and monitored, what to do when integrity or guidance is lost, and RNP AR approaches with their authorization.Module 5 · 8 min read
  6. Approvals, planning and contingenciesWho may fly PBN and on what authority: the pilot's PBN privileges, the operator's procedures and specific approvals under EASA and FAA rules, filing PBN capability in the flight plan, planning around GNSS availability and NOTAMs, and the contingency procedures when PBN capability is lost.Module 6 · 5 min read
  7. Quick referenceThe course on one page: the navigation specifications and their values, GNSS integrity figures, the database and preflight rules, path and deviation tolerances, the lines of minima, the failure actions, and the approvals.Module 7 · 5 min read

These courses are for study, exam and interview preparation. They do not replace your operator's approved training, your aircraft's manuals or the regulators' documents, which always govern.