En route and oceanic

Module 3 of 7Performance-based navigation (PBN)6 min readUpdated Nov 2026

Between departure and arrival, PBN sets how closely aircraft can be spaced. Over land the specifications support routes that no longer follow navaids; over oceanic and remote areas they support the performance-based horizontal separation applied there. In the North Atlantic, where radar and VHF voice contact are for the most part unavailable, separation is assured by the highest standards of horizontal and vertical navigation performance and of operating discipline.

In this module
  1. Continental en route
  2. Oceanic and remote: RNAV 10 and RNP 4
  3. The North Atlantic High Level Airspace
  4. Gross navigation errors
  5. Strategic lateral offsets
  6. Key points

Continental en route

EASA's overview table (GM1 SPA.PBN.100) gives four specifications for continental en route: RNAV 5, RNAV 2, RNP 2 and RNAV 1, plus A-RNP at 2 or 1 and, for helicopters, RNP 0.3. The FAA AIM says RNAV 2 is typically used for en route operations unless otherwise specified, with U.S. T-routes and Q-routes as examples, and requires a total system error of no more than 2 NM for 95 percent of the flight time. RNP 2 applies to both domestic and oceanic or remote operations.

Advanced RNP (A-RNP) is a specification defined by functions as much as by accuracy. In the U.S., the AIM lists its minimum functions as radius-to-fix (RF) turns, scalable RNP and parallel offset path generation; higher continuity, such as dual systems, may be required in some oceanic and remote continental airspace. Fixed radius transitions and time of arrival control are optional in the U.S.

Unlock the rest of this module

This course and its quiz are part of PRO, with every question bank on v1prep. Try PRO free for 7 days: no card needed, and it ends on its own.

Continue in v1prep → See PRO plans
Already a member? Sign in and the full course opens in the app

All modules

  1. The PBN conceptWhat performance-based navigation is: the navigation specification, RNAV and RNP and the monitoring that separates them, the specifications for each phase of flight, and why eligibility for one does not mean eligibility for another unless an inclusion is stated.Module 1 · 6 min read
  2. The system and its integrityThe FMS and the sensors it blends (GNSS, DME/DME, VOR/DME, inertial), how GPS integrity monitoring works (RAIM, fault detection and exclusion, SBAS), and what GNSS jamming and spoofing do to a PBN aircraft.Module 2 · 6 min read
  3. En route and oceanicThe en route specifications (RNAV 5, RNAV 2, RNP 2, A-RNP) and the oceanic ones (RNAV 10, RNP 4), the North Atlantic High Level Airspace and its equipment, and the crew procedures of oceanic flight: the crosschecks and route amendment checks that prevent gross navigation errors, and strategic lateral offsets.Module 3 · 6 min read
  4. Terminal proceduresRNAV 1 and RNP 1 SIDs and STARs: fly-by and fly-over waypoints, path terminators (TF, DF, CF, RF and heading legs), the navigation database and its rules, the checks before departure, how closely to fly the path, and what ATC may and may not change.Module 4 · 7 min read
  5. ApproachesRNP APCH and its four lines of minima (LNAV, LNAV/VNAV, LP and LPV), barometric VNAV and the temperature limits, how the final approach is flown and monitored, what to do when integrity or guidance is lost, and RNP AR approaches with their authorization.Module 5 · 8 min read
  6. Approvals, planning and contingenciesWho may fly PBN and on what authority: the pilot's PBN privileges, the operator's procedures and specific approvals under EASA and FAA rules, filing PBN capability in the flight plan, planning around GNSS availability and NOTAMs, and the contingency procedures when PBN capability is lost.Module 6 · 5 min read
  7. Quick referenceThe course on one page: the navigation specifications and their values, GNSS integrity figures, the database and preflight rules, path and deviation tolerances, the lines of minima, the failure actions, and the approvals.Module 7 · 5 min read

These courses are for study, exam and interview preparation. They do not replace your operator's approved training, your aircraft's manuals or the regulators' documents, which always govern.