Approvals, planning and contingencies

Module 6 of 7Performance-based navigation (PBN)5 min readUpdated Nov 2026

A PBN operation rests on three approvals: the aircraft's eligibility, written in its AFM; the operator's procedures and, for some operations, a specific approval; and the pilot's own qualification. Before a flight the crew add a fourth check: whether the satellites and navaids the operation depends on will be there.

In this module
  1. The pilot: PBN privileges
  2. The operator under EASA
  3. The operator under FAA rules
  4. The flight plan
  5. Planning around GNSS
  6. Contingencies
  7. Key points

The pilot: PBN privileges

Under EASA's aircrew rules (Article 4a of Regulation (EU) No 1178/2011), pilots may fly PBN procedures only once they have PBN privileges as an endorsement to their instrument rating. They are granted after a course of theoretical knowledge and flying training including PBN (FCL.615) and a skill test or proficiency check; the demonstration of PBN competence is entered in the pilot's logbook, or an equivalent record, and signed by the examiner. Since 25 August 2020, PBN privileges have been required for every instrument rating. The test schedules in Part-FCL add that, to establish PBN privileges, one of the approaches flown must be an RNP APCH.

Unlock the rest of this module

This course and its quiz are part of PRO, with every question bank on v1prep. Try PRO free for 7 days: no card needed, and it ends on its own.

Continue in v1prep → See PRO plans
Already a member? Sign in and the full course opens in the app

All modules

  1. The PBN conceptWhat performance-based navigation is: the navigation specification, RNAV and RNP and the monitoring that separates them, the specifications for each phase of flight, and why eligibility for one does not mean eligibility for another unless an inclusion is stated.Module 1 · 6 min read
  2. The system and its integrityThe FMS and the sensors it blends (GNSS, DME/DME, VOR/DME, inertial), how GPS integrity monitoring works (RAIM, fault detection and exclusion, SBAS), and what GNSS jamming and spoofing do to a PBN aircraft.Module 2 · 6 min read
  3. En route and oceanicThe en route specifications (RNAV 5, RNAV 2, RNP 2, A-RNP) and the oceanic ones (RNAV 10, RNP 4), the North Atlantic High Level Airspace and its equipment, and the crew procedures of oceanic flight: the crosschecks and route amendment checks that prevent gross navigation errors, and strategic lateral offsets.Module 3 · 6 min read
  4. Terminal proceduresRNAV 1 and RNP 1 SIDs and STARs: fly-by and fly-over waypoints, path terminators (TF, DF, CF, RF and heading legs), the navigation database and its rules, the checks before departure, how closely to fly the path, and what ATC may and may not change.Module 4 · 7 min read
  5. ApproachesRNP APCH and its four lines of minima (LNAV, LNAV/VNAV, LP and LPV), barometric VNAV and the temperature limits, how the final approach is flown and monitored, what to do when integrity or guidance is lost, and RNP AR approaches with their authorization.Module 5 · 8 min read
  6. Approvals, planning and contingenciesWho may fly PBN and on what authority: the pilot's PBN privileges, the operator's procedures and specific approvals under EASA and FAA rules, filing PBN capability in the flight plan, planning around GNSS availability and NOTAMs, and the contingency procedures when PBN capability is lost.Module 6 · 5 min read
  7. Quick referenceThe course on one page: the navigation specifications and their values, GNSS integrity figures, the database and preflight rules, path and deviation tolerances, the lines of minima, the failure actions, and the approvals.Module 7 · 5 min read

These courses are for study, exam and interview preparation. They do not replace your operator's approved training, your aircraft's manuals or the regulators' documents, which always govern.