PBN quick reference

Module 7 of 7Performance-based navigation (PBN)5 min readUpdated Nov 2026

Everything in this course on one page, for revision before a check, an exam or an interview. Each line points back to its module; your operator's procedures and the State's AIP govern.

In this module
  1. Navigation specifications
  2. GNSS
  3. Database and preflight
  4. Flying the path
  5. Lines of minima
  6. When something fails
  7. Approvals
  8. Key points
Specification Value (NM) Where Monitoring and alerting Notes
RNAV 10 (RNP 10) 10 Oceanic, remote No Old name RNP 10 still used (module 1)
RNP 4 4 Oceanic, remote only Yes Includes RNP 10; NAT PBCS tracks (module 3)
RNAV 5 5 En route, arrival No EASA table
RNAV 2 2 En route, arrival, departure No U.S. T and Q routes
RNP 2 2 En route, domestic and oceanic Yes
RNAV 1 1 SIDs, STARs, initial and intermediate approach No Typical U.S. SIDs and STARs
RNP 1 1 Terminal, initial and intermediate approach Yes RF optional
A-RNP 2 to 0.3 All phases Yes RF, scalable RNP, parallel offset; never includes RNP AR
RNP APCH 1, final 0.3 Approach Yes LNAV, LNAV/VNAV, LP, LPV; RF optional
RNP AR APCH Below 1, final 0.3 or less Approach Yes Specific approval; FAA: each operator's authorization sets its lowest RNP value

Unlock the rest of this module

This course and its quiz are part of PRO, with every question bank on v1prep. Try PRO free for 7 days: no card needed, and it ends on its own.

Continue in v1prep → See PRO plans
Already a member? Sign in and the full course opens in the app

All modules

  1. The PBN conceptWhat performance-based navigation is: the navigation specification, RNAV and RNP and the monitoring that separates them, the specifications for each phase of flight, and why eligibility for one does not mean eligibility for another unless an inclusion is stated.Module 1 · 6 min read
  2. The system and its integrityThe FMS and the sensors it blends (GNSS, DME/DME, VOR/DME, inertial), how GPS integrity monitoring works (RAIM, fault detection and exclusion, SBAS), and what GNSS jamming and spoofing do to a PBN aircraft.Module 2 · 6 min read
  3. En route and oceanicThe en route specifications (RNAV 5, RNAV 2, RNP 2, A-RNP) and the oceanic ones (RNAV 10, RNP 4), the North Atlantic High Level Airspace and its equipment, and the crew procedures of oceanic flight: the crosschecks and route amendment checks that prevent gross navigation errors, and strategic lateral offsets.Module 3 · 6 min read
  4. Terminal proceduresRNAV 1 and RNP 1 SIDs and STARs: fly-by and fly-over waypoints, path terminators (TF, DF, CF, RF and heading legs), the navigation database and its rules, the checks before departure, how closely to fly the path, and what ATC may and may not change.Module 4 · 7 min read
  5. ApproachesRNP APCH and its four lines of minima (LNAV, LNAV/VNAV, LP and LPV), barometric VNAV and the temperature limits, how the final approach is flown and monitored, what to do when integrity or guidance is lost, and RNP AR approaches with their authorization.Module 5 · 8 min read
  6. Approvals, planning and contingenciesWho may fly PBN and on what authority: the pilot's PBN privileges, the operator's procedures and specific approvals under EASA and FAA rules, filing PBN capability in the flight plan, planning around GNSS availability and NOTAMs, and the contingency procedures when PBN capability is lost.Module 6 · 5 min read
  7. Quick referenceThe course on one page: the navigation specifications and their values, GNSS integrity figures, the database and preflight rules, path and deviation tolerances, the lines of minima, the failure actions, and the approvals.Module 7 · 5 min read

These courses are for study, exam and interview preparation. They do not replace your operator's approved training, your aircraft's manuals or the regulators' documents, which always govern.