Home / Courses / Performance-based navigation (PBN)

Performance-based navigation (PBN)

7 modules42 min in allIncluded in PROUpdated Nov 2026

This course is for pilots who fly, or are training to fly, routes and procedures built on performance-based navigation: ATPL students meeting PBN in Radio Navigation and Operational Procedures, first officers joining an airline whose SIDs, STARs and approaches are mostly RNAV and RNP, and candidates preparing for a technical interview. It explains what each navigation specification asks of the aircraft and of the crew, and what you check, monitor and do when something fails.

PBN changed the question from "which navaid am I flying?" to "how accurately, and with what assurance, is my aircraft navigating?". A route or procedure states a navigation specification such as RNAV 1, RNP 4 or RNP APCH; your aircraft is eligible for it if its AFM or avionics documents say so; and the crew operate it with the procedures the operator has set. Every figure in this course is taken from the regulators' own documents: the FAA Aeronautical Information Manual, the EASA rules for air operations and for aircrew with their acceptable means of compliance, and the ICAO North Atlantic manual.

Modules 1 and 2 cover the concept and the system: navigation specifications, RNAV and RNP, the FMS and its sensors, and GNSS integrity. Modules 3 to 5 follow a flight: en route and oceanic, terminal procedures, and approaches with their lines of minima, including RNP AR. Module 6 covers approvals, flight planning and contingencies under EASA and FAA rules, and module 7 is a one-page quick reference for revision.

Where the FAA and EASA differ, the module says which rule it quotes. Your operator's procedures, your AFM and FCOM, and the State's AIP always govern.

Preview module 1 →

Modules

  1. The PBN conceptWhat performance-based navigation is: the navigation specification, RNAV and RNP and the monitoring that separates them, the specifications for each phase of flight, and why eligibility for one does not mean eligibility for another unless an inclusion is stated.Module 1 · 6 min read
  2. The system and its integrityThe FMS and the sensors it blends (GNSS, DME/DME, VOR/DME, inertial), how GPS integrity monitoring works (RAIM, fault detection and exclusion, SBAS), and what GNSS jamming and spoofing do to a PBN aircraft.Module 2 · 6 min read
  3. En route and oceanicThe en route specifications (RNAV 5, RNAV 2, RNP 2, A-RNP) and the oceanic ones (RNAV 10, RNP 4), the North Atlantic High Level Airspace and its equipment, and the crew procedures of oceanic flight: the crosschecks and route amendment checks that prevent gross navigation errors, and strategic lateral offsets.Module 3 · 6 min read
  4. Terminal proceduresRNAV 1 and RNP 1 SIDs and STARs: fly-by and fly-over waypoints, path terminators (TF, DF, CF, RF and heading legs), the navigation database and its rules, the checks before departure, how closely to fly the path, and what ATC may and may not change.Module 4 · 7 min read
  5. ApproachesRNP APCH and its four lines of minima (LNAV, LNAV/VNAV, LP and LPV), barometric VNAV and the temperature limits, how the final approach is flown and monitored, what to do when integrity or guidance is lost, and RNP AR approaches with their authorization.Module 5 · 8 min read
  6. Approvals, planning and contingenciesWho may fly PBN and on what authority: the pilot's PBN privileges, the operator's procedures and specific approvals under EASA and FAA rules, filing PBN capability in the flight plan, planning around GNSS availability and NOTAMs, and the contingency procedures when PBN capability is lost.Module 6 · 5 min read
  7. Quick referenceThe course on one page: the navigation specifications and their values, GNSS integrity figures, the database and preflight rules, path and deviation tolerances, the lines of minima, the failure actions, and the approvals.Module 7 · 5 min read

Frequently asked questions

What is the difference between RNAV and RNP?

Both are navigation specifications under performance-based navigation, and the number in each name is the lateral accuracy in nautical miles to be achieved at least 95 percent of the flight time. RNP adds on-board performance monitoring and alerting: the system checks the navigation performance it achieves and tells the crew when it no longer meets the requirement. RNAV specifications have no such requirement, which is why the ICAO PBN manual and EASA's rules call RNP 10 by the name RNAV 10. Many routes, charts and approvals, including North Atlantic ones, still say RNP 10, and EASA treats the two terms as equivalent.

Is an aircraft approved for RNP 1 also approved for RNAV 1?

Not automatically. The FAA AIM says navigation specifications are different from one another, not better or worse, and that an RNP 1 eligibility does not mean automatic RNP 2 or RNAV 1 eligibility; each eligibility must be listed in the AFM or the avionics documents. One exception is written into the specifications: an aircraft eligible for RNP 4 is also eligible for RNP 10 (RNAV 10).

Which PBN operations need a specific approval under EASA rules?

For airplanes, only RNP AR APCH (SPA.PBN.100); the other is RNP 0.3 for helicopters. For every other navigation specification, the commercial air transport rule CAT.OP.MPA.126 requires that the specification be stated in the AFM or an equivalent approved document and that the aircraft be operated in conformance with it, and the AMC asks the operator for procedures, database management, MEL entries and crew training.

What are the lines of minima on an RNAV (GPS) or RNP approach?

An RNP APCH can carry four: LNAV (lateral only, to an MDA), LNAV/VNAV (lateral and vertical guidance from barometric VNAV or SBAS, to a DA), LP (SBAS lateral guidance with localizer-like sensitivity, to an MDA) and LPV (SBAS lateral and vertical guidance, to a DA that can be as low as 200 ft above touchdown in the United States). LP and LPV need SBAS. Not all four appear on one chart: the FAA AIM says LP is published only where terrain, obstructions or another reason prevent a vertically guided line, so it never appears with LPV or LNAV/VNAV, though it can appear with LNAV.

What do I do if RAIM is lost on an RNP approach?

Under the FAA AIM, if the RAIM alert comes before the final approach waypoint, do not descend: continue to the missed approach waypoint via the final approach waypoint, fly the missed approach and tell ATC. If it comes after the final approach waypoint, climb and fly the missed approach. EASA's AMC also asks the crew to discontinue an RNP APCH when the on-board monitoring and alerting is lost, unless the required visual references are in sight.

What is RNP AR?

RNP authorization required: approaches whose lateral accuracy values scale to RNP 0.3 or lower in the final approach (the FAA AIM's table gives 0.1 to 1.0 for RNP AR approach segments, and EASA's overview table also goes down to 0.1) and, in the FAA AIM, departures whose lateral accuracy values go no lower than RNP 0.30, often with radius-to-fix turns, built for specific benefits at specific places. They need a specific approval of the operator: under EASA, SPA.PBN.100 for RNP AR APCH; from the FAA, an OpSpec, MSpec or letter of authorization for any RNP AR approach or departure. In the United States the charts are titled RNAV (RNP); elsewhere you may see RNP RWY XX (AR).

Unlock every module

This course and its quiz are part of PRO, with every question bank on v1prep. Try PRO free for 7 days: no card needed, and it ends on its own.

Continue in v1prep → See PRO plans
Already a member? Sign in and the full course opens in the app

These courses are for study, exam and interview preparation. They do not replace your operator's approved training, your aircraft's manuals or the regulators' documents, which always govern.