Skip to content

A320 Dimensions and Ground Maneuvering

Airbus A320ATPL · Type rating9 min readUpdated Nov 2026
Definition

A320 dimensions and ground maneuvering cover the external size of the A318, A319, A320 and A321, the pilots' eye position and the gear geometry that decide what the crew can see and where the wheels run, and the steering limits, turn widths and ground connections used on taxiways and stands.

The A320 family is one wing on four fuselages. The A318, A319, A320 and A321 all span 34.10 m with wing-tip fences, and the three larger models 35.80 m with sharklets, but their lengths run from 31.45 m to 44.51 m and the distance from the nose gear to the main gear changes with them. On the ground these numbers decide what the pilots can see, how tightly the airplane turns, which stands it fits and how much runway it needs to turn around.

The principal dimensions here come from the EASA type certificate data sheet (TCDS) EASA.A.064, Issue 62, which gives one set for each series, ceo and neo alike, whatever the engine option. Steering, visibility and turn figures come from the Airbus flight crew operating manual (FCOM), the flight crew techniques manual (FCTM) and Airbus's aircraft characteristics document for airport planning. Figures are for the A320 unless another model is named.

Principal dimensions

TCDS dimension A318 A319 A320 A321
Length 31.45 m 33.84 m (111 ft) 37.57 m (123 ft 3 in) 44.51 m (146 ft)
Span without sharklets 34.10 m 34.10 m 34.10 m 34.10 m
Span with sharklets Not listed 35.80 m 35.80 m 35.80 m
Height 12.79 m 11.76 m 11.76 m (38 ft 7 in) 11.76 m
Nose gear to main gear 11.04 m 11.04 m 12.64 m 16.91 m

Four figures are common to every model: the horizontal stabilizer spans 12.45 m, the fuselage is 3.95 m in outside diameter, the engine axes are 11.51 m apart and the main landing gear legs 7.59 m (24 ft 11 in). Inside, the cabin is 3.70 m wide and seats six abreast.

The wingspan is 34.10 m (111 ft 10 in) for an airplane fitted with wing-tip fences and 35.80 m (117 ft 5 in) for one fitted with sharklets. For the ceo the TCDS treats sharklets as a modification open to some models only: MOD 160500, or the retrofit MOD 160080, on the A319 and A320, and MOD 160023 on the A321. Each neo is certified on the basis of its sharklet-equipped ceo, which is why a neo spans 35.80 m. A mixed fleet can therefore hold two spans, and the span belongs to the individual airplane, not to its model name.

Two exam traps follow from the table. The A320 is longer than its span, while the A319 and A318 are shorter than theirs; and the smallest model, the A318, is the tallest. All four are ICAO code letter C, which covers spans from 24 m up to but not including 36 m, the sharklet span included.

Pilot eye position and visibility

What the crew can see depends on sitting at the design eye position. The FCTM's test for the seat is a visual one: the pilot lines up the red ball and the white light provided for the purpose, and the eyes are then where the design assumes.

At that position the FCOM puts the pilot eye height at roughly 4.6 m (15 ft) over the ground, for an airplane standing on its wheels. The FCTM gives a cut-off angle of 20° below the horizontal over the nose and an obscured ground segment of 42 ft (12.5 m). The figures agree: a sight line 20° below the horizontal from 4.6 m meets the ground about 12.6 m ahead. Anything closer is invisible from the seat, so a taxi turn must be started before an obstacle approaches the obscured segment.

Eye height is also a training item for pilots coming from larger Airbus types. In the FAA FSB report's differences tables from the A330 and from the A340 to the A320, taxi eye height and turn radius are a Level D item for both training and checking. Level D training needs a maneuvers device: an FTD of level 6 or 7, or a full flight simulator of level A or B. Between models of the family, the 2003 Airbus operator differences (ODR) tables carry a single taxi note, a shorter nose-to-main-gear distance on the A318 and A319 and a longer one on the A321, each with the same taxi technique, taught at Level B by computer-based training or briefing.

Wheelbase and nosewheel steering

The wheelbase, the distance from the nose gear to the main gear, is 12.64 m (41 ft 6 in) on the A320, 11.04 m (36 ft 3 in) on the A319 and A318 and 16.91 m (55 ft 6 in) on the A321. The stretches and shrinks were made in two places, forward and aft of the wing, and only the forward ones shift the nose gear. On the A321 the longer wheelbase widens every turn.

Nosewheel steering is commanded electrically and powered hydraulically: a computer, the BSCU (brake and steering control unit), sends the orders and the yellow hydraulic system moves the wheels. It is available only on the ground, with at least one engine running, the towing control lever in its normal position and the A/SKID & N/W STRG switch selected ON. Three sources can command it: the two hand wheels, linked together and summed, the rudder pedals and the autopilot. How far the wheels may turn depends on ground speed and on which source is commanding.

Order or condition Maximum nosewheel angle
Tiller (steering hand wheel) 75° either way
Rudder pedals, full deflection at low speed 6° either way
Towing, steering deactivated by the lever on the nose gear 95° either way
Towbarless towing and pushback, accepted towbarless vehicles 85° either way
Taxiing with deflated tires 30°

The FCOM gives an effective turn angle of 70.2° at the 75° maximum. On straight taxiways and in shallow turns the pedals are enough, with a hand kept on the tiller; sharper turns need the tiller. Steering authority falls as ground speed rises, while the rudder becomes more effective, and has no effect left by 130 kt; the FCTM advises against the tiller on the takeoff roll because it is so effective that the airplane may overreact.

Speed matters as much as angle. Turns of 90° or more are flown below 10 kt. With a takeoff weight above 76,000 kg, the A320 FCOM limits taxi speed in a turn to 20 kt. The FCOM limits taxi speed to 7 kt in turns when no gear has more than one flat tire, and to 3 kt when two tires on one main gear are flat; in either case steering stays within 30°.

Turning radius and 180° turns

Airbus's airport planning figures are worked out for a slow, steady turn on a dry surface, with equal thrust on both engines and no differential braking. R3 is the radius from the turn center to the outside face of the nose tire at maximum steering.

A319 A320 A321
Nose gear radius R3 12.11 m 13.81 m (45 ft 4 in) 18.00 m
Minimum pavement width for 180° turn, theoretical 20.64 m (67 ft 9 in) 22.90 m (75 ft 2 in) 27.6 m (90 ft 7 in)
Runway width for a 180° turn, recommended technique, dry (FCOM) Not given About 24 m (79 ft) About 30 m (99 ft)

The planning figure is a geometric minimum for airport designers. The FCOM figure is what a crew needs with the recommended technique, and it too contains no margin, so margin is added on a wet or contaminated runway. Both depend on where the wheels go, so they follow the wheelbase, not the span: the A321 needs about 6 m more runway width than the A320 to turn around, and its runway width is worth checking before accepting a backtrack.

In the FCTM technique for a 180° turn on a runway, the airplane is held at 5 to 8 kt from start to finish, and at 5 kt when the runway is wet or contaminated. The captain turns to the left, or the first officer to the right, maintaining a 25° divergence from the runway axis.

Exam tip: keep the two sets apart. About 24 m and 30 m are the FCOM's practical widths for the A320 and A321; 22.90 m and 27.6 m are the planning document's theoretical minimums.

Wing-tip and ground clearances

Wing-tip clearance is the horizontal room between the wing tip and anything beside the airplane. Sharklets add 0.85 m at each tip, so a stand or taxi route planned for 34.10 m must be checked before a sharklet airplane uses it. On an apron, ICAO Annex 14 requires a code C aircraft stand to keep at least 4.5 m of clearance from neighboring aircraft, buildings and other objects.

Gear height also matters over the threshold. The A320 FCOM's landing geometry shows that, on a 3° ILS path that brings the ILS antenna over the threshold at 50 ft, the radio altimeter reads 34 ft when the main gear passes over it.

The aircraft characteristics document places the antennas as follows:

Antenna Location
VHF 1, GPS 1 and 2 Upper forward fuselage
VHF 2, radio altimeters 1 and 2 Lower aft fuselage
VHF 3, emergency locator transmitter Upper aft fuselage
DME 1 and 2 Lower forward fuselage
VOR Top of the fin
HF Fin leading edge
TCAS and ATC/Mode S transponder Top and bottom of the fuselage
Weather radar Nose radome

Ground service connections

The ground power receptacle, the external power connector, is near the nose wheel. On the ground, external power can supply the whole electrical network. On the overhead ELEC panel, the EXT PWR pushbutton lights AVAIL in green once a ground supply with correct voltage and frequency is connected, and ON in blue after a press closes the external power contactor. The ECAM ELEC page shows the external power voltage in amber below 110 V or above 120 V, and its frequency in amber below 390 Hz or above 410 Hz. Engine generators take priority over external power, which, with its pushbutton ON, takes priority over the APU generator. For the ground crew, an EXT PWR NOT IN USE light, in white, shows when the ground power unit has stopped supplying the airplane and may be disconnected.

Two air connections serve the pneumatic and air conditioning systems. The LP ground air connector takes a low-pressure air conditioning cart. The high-pressure ground air connector takes an HP air start unit for engine starting when the APU is not available. The FCOM forbids using the packs together with an LP air conditioning unit, and APU bleed together with an HP air start unit, to protect those systems. When neither APU bleed nor HP ground air is available, a running engine can supply the other's starter through the crossbleed valve: X BLEED is selected open and the running engine's thrust raised, once the area behind the airplane has been checked.

Fuel goes in through one or two pressure refueling points under the wings, on the right and, if installed, on the left; gravity filling points on top of the wings serve when pressure refueling is not available. The APU oil is filled in the tail cone, which houses the APU and is one of the four unpressurized areas of the airframe, with the nose gear bay, the air conditioning compartment and the main gear bay. For pushback and towing procedures see ground handling, pushback and engine start; for the gear itself, A320 landing gear, brakes and steering.

Frequently asked questions

What is the wingspan of the A320?

The A320 spans 34.10 m (111 ft 10 in) with wing-tip fences and 35.80 m (117 ft 5 in) with sharklets. The A319 and A321 have the same two figures and the A318 34.10 m. Sharklets are a modification on some ceo models, while each neo is certified on the basis of its sharklet-equipped ceo, so a neo spans 35.80 m. Either span is ICAO code letter C, which runs from 24 m to less than 36 m.

How wide a runway does an A320 need for a 180° turn?

Using the FCOM's recommended technique on a dry runway, an A320 needs about 24 m (79 ft) of width to turn through 180 degrees and an A321 about 30 m (99 ft), and neither figure includes a margin. Airbus's airport planning document quotes smaller theoretical minimums for the same turn: the A321 27.6 m, the A320 22.90 m and the A319 20.64 m. Margin is added on a wet or contaminated runway.

What is the pilot eye height of the A320?

The FCOM gives roughly 4.6 m (15 ft) from the ground to the pilots' eyes, for an airplane standing on its wheels with the seats set correctly. A pilot finds the right seat position by lining up the red ball and the white light provided for the purpose. Seated there, the view over the nose is cut off 20 degrees below the horizontal, hiding 42 ft (12.5 m) of ground ahead.

What is the wheelbase of the A320, A319 and A321?

The TCDS gives the distance between the nose and main landing gear as 12.64 m (41 ft 6 in) on the A320, 11.04 m on the A319 and A318 and 16.91 m on the A321. Length was changed in two places, forward and aft of the wing, and only the forward changes move the nose gear.

How far can the A320 nosewheel be steered?

The two interconnected steering hand wheels, or tillers, turn the nosewheel up to 75° either way, and the rudder pedals give up to 6° at low speed. Steering authority falls as ground speed rises and is gone by 130 kt. For towing, a lever on the nose gear deactivates the steering so the wheels can turn 95°; towbarless towing is approved up to 85°, and with deflated tires the angle is limited to 30°.

Test yourself on A320 Dimensions and Ground Maneuvering

The v1prep banks cover this topic in the A320 type-rating bank, with a worked explanation for every answer. EASA ATPL, PPL, IR and CPL, the FAA written tests and type ratings for the A320, A330, A350, 737, 767, 777, A220, 787, ATR 72 and E-Jet.

Start practicing →
15,000+ questions · EASA & FAA · Free to start

Library articles are written for study and exam preparation. They do not replace your aircraft's approved documentation, your operator's procedures or the regulations themselves.