Documents, marks and labels

Module 3 of 7Dangerous goods3 min readUpdated Nov 2026

A dangerous goods package must be recognizable at every step without being opened: on paper by its transport document, and on its outside by its marks and labels. Acceptance (module 4) is the check that the two agree.

In this module
  1. The transport document
  2. Marks and labels
  3. Cargo Aircraft Only
  4. Overpacks
  5. English, and the language of the documents
  6. Key points

The transport document

The shipper describes and certifies the goods on a dangerous goods transport document. EASA's SPA.DG.110 requires the operator to make sure dangerous goods are accompanied by it, as completed by the person offering them for air transport, unless the information is provided electronically, and its AMC asks for two copies and the English language. The U.S. rule (49 CFR 175.30) is the same in substance: no one may accept a hazardous material for an aircraft unless it is described and certified on a shipping paper prepared in duplicate.

What happens to the copies:

Unlock the rest of this module

This course and its quiz are part of PRO, with every question bank on v1prep. Try PRO free for 7 days: no card needed, and it ends on its own.

Continue in v1prep → See PRO plans
Already a member? Sign in and the full course opens in the app

All modules

  1. The frameworkWhere the rules for dangerous goods by air come from: ICAO Annex 18 and the Technical Instructions, EASA's CAT.GEN.MPA.200 and the Part-SPA approval, the definitions of dangerous goods and of a dangerous goods accident and incident, and State exemptions and approvals.Module 1 · 5 min read
  2. ClassificationHow dangerous goods are identified: the nine hazard classes and their divisions, forbidden materials, the proper shipping name and the UN or ID number, packing groups and what they say about the degree of danger, and subsidiary risks.Module 2 · 3 min read
  3. Documents, marks and labelsHow a shipment of dangerous goods announces itself: the shipper's transport document and its certification, the marks and hazard labels on the packages, the Cargo Aircraft Only label, overpacks, and the English language rule.Module 3 · 3 min read
  4. Acceptance, loading and in flightFrom the cargo terminal to the flight deck: acceptance and the operator's inspection, stowage and segregation, the written information to the captain (NOTOC) and what it contains, records kept on the ground, changes of loading position, battery fires, and what the captain tells ATC in an emergency.Module 4 · 7 min read
  5. Passengers and crewWhat passengers and crew may carry: the Part 8 exceptions of the Technical Instructions, the U.S. PackSafe rules, lithium batteries and power banks (100 Wh, 160 Wh, 2 g and 8 g), spare batteries in the cabin only, damaged devices, and what the crew does about a battery fire.Module 5 · 4 min read
  6. Reporting and trainingWhat must be reported and how fast under EASA and U.S. rules, the dangerous goods occurrence report, the training every person in the chain receives, with its emergency content and its two-year cycle, and the lesson of ValuJet 592.Module 6 · 7 min read
  7. Quick referenceThe course on one page: the rules and who approves what, the nine classes and packing groups, documents and labels, acceptance and stowage, the information to the captain, passengers' batteries, emergencies, reporting deadlines and training cycles.Module 7 · 4 min read

These courses are for study, exam and interview preparation. They do not replace your operator's approved training, your aircraft's manuals or the regulators' documents, which always govern.